SERVICE

Caterpillar Component Rebuild Center

Wyoming Machinery Company’s 73,320 square foot Component Rebuild Center (CRC) delivers like-new or better than new equipment and component rebuilds. Caterpillar’s equipment design functionality allows components to be rebuilt multiple times over the lifetime of the machine extending customer ownership and equipment performance and reliability. Completed in 2002, our CRC has achieved the prestigious Caterpillar 5 Star Contamination Control award which recognizes that Wyoming Machinery Company has adhered to over 120 standards in all phases of contamination control in our facilities, meeting the same safe safety, quality, and contamination standards required of the Caterpillar factory. Our ultra-clean CRC, experienced Caterpillar trained service technicians, and genuine Cat equipment parts allow Wyoming Machinery Company to deliver a like-new or better than new rebuild for your machine and its components.
In addition, our CRC features:

• Two 25-ton bridge cranes
• Two 15-ton bridge cranes
• Two 10-ton bridge cranes
• 50+ 1-3 ton jib cranes
• 2 double-ended Dynamometers to test engines and powertrains
• 1 single-ended Dynamometer with the capacity to hold up to 8000 horsepower
• 20 rebuild bays
• In-house Machine Shop
• In-house Hydraulic Shop
• Component tear-down & wash facilities
• Failure Analysis testing
• Fuel and rod test areas
• State-of-the-art paint booth

• Every component is thoroughly cleaned, disassembled, and washed prior to entering the service area. Assigned service technician groups follow each component from teardown to final test, reducing errors and repair times. Technicians have on-line parts ordering capabilities in each service bay and parts are delivered directly to each bay allowing service technicians to focus on completing repairs and less time tracking parts. No job is too big for our award-winning CRC service facilities. Contact us today to get started with your equipment.

Regular scheduled Diesel Particulate Filter Cleaning is recommended to help remain diesel emission compliant, minimize downtime and maintenance costs, improve performance, increase your equipment fuel economy and horsepower, and decrease your chance of filter and engine damage. Wyoming Machinery Company offers DPF cleaning services and DPF Preventative Maintenance to keep your engines in top condition with our state-of-the-art Diesel Particulate Filter Cleaning for all on-highway trucks and off-road machines. Contact us to clean your DPF or to schedule your complete Diesel Particulate Filter Cleaning services, including Truck Filter Cleaning, Smoke Opacity Testing, and Diagnosis & Repair, today!

Wyoming Machinery Company is your one-stop shop for all your heavy equipment and machinery service needs. We offer full-service Caterpillar truck service and repair in Wyoming for all Cat equipment, ranging from diesel engine repair service, hydraulic repair service, transmission system repair, electrical repair, preventative maintenance, and more. Our Caterpillar trained field and shop service technicians and new state-of-the-art service center can help you will all of your heavy equipment service and repair. For a Caterpillar service center near you see our Cat equipment repair locations  here .

Wyoming Machinery Company is here for all of your Cat mobile repair and field service needs, no matter the location or the project. Our strategically placed service centers, state-of-the-art service center and technology, 120 Cat-certified field service technicians, and complete fleet of fully outfitted field service trucks and vehicles allow us to provide a wide range of field repair or mobile service for all heavy equipment and on and off-road trucks. From emergency diesel engine repair service, field engine repair, transmission repair, field welding and machining, hydraulic repairs and servicing, portable load bank testing, scheduled maintenance field service, undercarriage repairs and maintenance, oil sampling, and more, contact our skilled Wyoming Machinery Company Field Service Technicians to schedule your mobile services today or to learn more about our Field Service Agreement.

A key part of ensuring your equipment’s ongoing health.

Caterpillar machines are subject to continually increasing customer demands. As a result, design criteria require components to operate at faster speeds, higher temperatures, and more extreme pressures. Monitoring equipment parameters is therefore more critical than ever. Cat Equipment Management (EM) Services use electronic data, fluid analysis, machine inspections, and other criteria to aid in this process. Fluid analysis is an integral part of the Cat EM Services and Cat Condition Monitoring processes.

Cat SOS Services is a fluid analysis process developed by Caterpillar to monitor the overall condition of equipment. At Wyoming Machinery Company, we analyze fluids from all different makes and models using the Cat SOS process. Technicians at our lab run numerous tests to determine the presence of abnormal wear, oil condition, oil contamination, and other issues. Test data is used to monitor the machine health of engines, transmissions, hydraulic systems, final drives, gas compression engines, compressors, and more.

Our commitment at Wyoming Machinery Company is to maintain your machine’s overall health and prevent small problems from turning into catastrophic issues. We help customers attain low operating costs, peak performance, and top resale value.

Benefits of fluid analysis at Wyoming Machine Company:

• Drop off equipment at any of our four locations or use pre-paid mailers
• Up-to-date analytical instrumentation
• Expert recommendations provided by Caterpillar-trained technicians
• 24 hours or less turnaround time for most fluid and oil analysis tests; same-day results for samples received in the lab by 8 a.m.
• Results can be reviewed via email, U.S. mail, or online via Caterpillar SOS Services Web
• Condition Monitoring support through Caterpillar-trained technical communications

SOS Services Oil Analysis

• Wear metals determination
• 20+ wear metals and additives
• Optical particle count (non-engine compartments)
• Visual and filter patch analysis

Oil Condition

• FTIR analysis for oxidation, sulfation, and nitration
• Viscosity @ 100c
• Total Base Number (TBN) and Total Acid Number (TAN)

Oil Contamination

• FTIR analysis for soot
• Fuel dilution by Perkin Elmer gas chromatograph
• Glycol contamination by PE gas chromatograph
• Water detection by hot plate and Karl Fisher (volumetric)

SOS Services Coolant Analysis

Two types of analysis to determine coolant type, boil & freeze protection, coolant condition, and coolant contamination Level 1 Analysis - basic tests for coolant condition

• Glycol concentration
• Freeze point
• Boil point
• pH
• Conductivity
• Nitrite concentration
• Odor
• Color and appearance
• Foam
• Oil or Fuel presence

Level 2 Analysis –extensive chemical evaluation of the coolant, plus overall cooling system condition

• Basic Level 1 tests
• Coolant Chemistry – tests including additives that make up extended life (ELC) or conventional coolants
• Cooling System Health – tests which can help indicate possible erosion/corrosion, overheating, stray current, air entry, or exhaust gas entry issues

SOS Services Fuel Analysis

Typical Fuel Analysis Tests – which may help identify filter plugging, hard starting, deposits, corrosive/abrasive/adhesive wear, and/or low power.

• Biodiesel Content
• Cetane Index
• Cloud Point
• Cold Filter Plugging Point
• Density
• Distillation Curve
• Elemental Analysis
• Flash Point
• Oxidation Stability
• Particle Count
• Pour Point
• Sulfur Content
• Viscosity
• Water Content

Wyoming Machinery provides technology and service to provide dramatic improvements in productivity, safety, and efficiency for any type of mining operation. Our mining equipment services include:

Field Service

• Major Structural Fabrication
• Removal and Installation of components on draglines and shovels
• 3 fully stocked tool vans
• Mobile machining equipment from 1-3/4 to 8' boring bars
• Portable XYZ mill
• Laser FARO tracker and arm
• Portable lifting system (9.5M pound lifting capacity, climbing jacks), with synchronous pump system
• 40+ technicians, (welding, machining, and mechanical)
• Electric motor alignment and in place commutator rotation
• Specialized boom chord replacement and welding services (6+ technicians)
• Large project planning and management for machine relocation and major outage / shutdowns
• 320' of track with carts for moving heavy structures

Weld Shop

• 2 80- Ton Overhead Cranes with 160 ton lifting capacity
• 17 weld stations
• 11,000 sq ft dedicated floor space
• Climate controlled Welding and Fabrication Shop
• Plasma CNC table

Machine Shop

• Ability to control critical path of large outages with CAT intellectual property
• Dedicated machining equipment and technicians.
• Hydraulics

  Wyoming Machinery Company is fully equipped to handle all your equipment hydraulic service needs. Our highly trained team of experts can provide full rebuild and repair capabilities for Cat and non-Cat equipment. With a full range of testing capabilities, all repairs are completed and guaranteed to surpass all Cat standards and perform under exceptionally high-quality controls. Our state-of-the-art heavy equipment service facility offers:
  *3 bays
  *4 hydraulic cylinder benches
  *Our shop supports 14-inch diameter to 29-foot-long honing capabilities and piston nut torqueing up to 45,000 lbs
  *Gear, vane, and piston pump and motor reconditioning and testing
  
  We pride ourselves in being your stop for all hydraulic services, contact us today to learn more about our hydraulic rebuild and repair services in Wyoming.

Wyoming Machinery Company’s fully-equipped machine shop combines the capabilities of a large-scale service shop with the service and support of a local business. Our expertly trained and Cat-Certified Service Technicians can help you reduce heavy equipment spending, reduce your equipment downtime, and maximize productivity. Wyoming Machinery Company's machine shop offers:

• Haul truck wheel repairs
• Track roller frame and bogie suspension parts machining
• Pivot shaft undersize turning
• Engine block and head resurfacing form a 3300 to a C175 engine.
• Excavator and loader bucket and linkage bore rebuilding
• Blade circle machining
• Belt pulley reconditioning
• Short-run piece part manufacturing
• Repairs to tractor articulation bores, truck bed pivot bores
• Thread milling to 32 in. diameter, internal or external
• Deep-hole metal drilling
• 4-axis contour milling
• Drafting, G/M-code and CMI services

Wyoming Machinery Company has been providing on-Highway Truck and diesel service and repair since 1969. Our 4 state-of-the-art 5-star rated service facilities (all conveniently located with easy access to the I-25 & I-80 interchange) is contamination controlled and offers:

• 18 On-Highway Truck Bays
• 10,000 lb overhead cranes
• 40,000 lb wheel lifts
• States only certified in-ground chassis dynamometer (Single, Dual & Spread Axle capabilities on chassis DYNO)
• Full-scale DPF cleaning machine for all makes and models
• 10 Caterpillar-certified PAC Service Technicians

Wyoming Machinery Company’s full-service Track and Undercarriage Service Shop offers roller, idler, and track repair and rebuilds up to a D11. Whether you need track repair or undercarriage services for your construction, mining, ag equipment, oil & gas industry equipment for Cat or non-Cat equipment, Wyoming Machinery Company will keep you rolling with our fully-equipped, state-of-the-art facility for track repair, maintenance, and undercarriage rebuilds. Our Track and Undercarriage Repair Shop includes:

• Two subarc welders for idler rebuilds
• Two roller presses
• Induction ovens for idler rebuilds
• Three track benches

The Wyoming Cat team of highly trained AWS D1.1 certified welders have the technical skills and experience to perform a wide range of equipment welding and fabrication services. Wyoming Machinery Company is your stop for all welding, full manufacturing, and repair capabilities, including:

• Abrasive Resistance Material (ARM) automated welding application
• Automated bore and face welding
• TIG aluminum and stainless welding capabilities
• MIG aluminum, steel and cast iron welding capabilities